- Fa - axial load
- | Noise test by vibration level for tapered roller bearings
- | P - dynamic equivalent load
konstruktiv! is our information channel for engineers and technicians: sign up for the newsletter
The contact angle is a crucial factor when it comes to the axial load capacity: the greater the angle, the more the bearing can be subjected to higher axial loads. Most series have a contact angle between 10° and 16°. The 313 and 323 series have larger contact angles of approx. 30° and can therefore be subjected to very high axial loads.
Tapered roller bearings are usually installed in pairs in an X or O arrangement.
Abutment dimensions and radial runout accuracy have a decisive impact on the service life and function of rolling bearings. The selection of the shaft, housing and bearing tolerance should therefore always be checked in advance.
The following tolerance classes are available:
- Standard tolerances available ex stock: P0/PN
- Special tolerances: P6, P5
Only cages made of steel sheet are used for tapered roller bearings.
Since the cages protrude laterally beyond the flat surface, the connection dimensions must be observed.
A lubricant selection that is precisely tailored to the application conditions contributes disproportionately to the service life both in a positive and in a negative sense. For this reason, the technical and economical optimization of lubricant is an important contribution made by our application consulting.
An essential property of greases and oils is the reliable mechanical separation of the rolling element from the raceway. Depending on the application, you need special types of grease to achieve this function. The following properties in particular affect the function:
- the starting and operating temperature
- the speed of the bearing
- the external ambient conditions (moisture, contamination, vapors/gases...)
Our application engineer would be happy to analyze your application conditions and recommend suitable lubricants.
We use the following lubricant manufacturers as standard suppliers:
- Kyodo Yushi
- Klüber Lubrication
We would be happy to make you a concrete offer for special processing, including the use of greases, oils or preserving agents that you specifically request.
Findling Wälzlager has already produced more than 1,500 drawing parts for its customers. We will find you an economically and technically optimal solution for your application from the combination of ABEG® performance class and designs. You can trust 100 years of experience in rolling bearing technology.