Heavy-section plain bearings

Heavy-section plain bearings consist of turned solid bronze or sinter bronze. Any products without solid lubricant require maintenance.

Product range

Series	Description	available in ABEG® performance classes
Bxx-yyy	bronze sliding bearing according to DIN 1850/ISO 4379, requires maintenance x: alloy code y: design of the lubrication groove alloy code xx, code stands for max. dynamic load (e.g. 06 = 60 N/mm², 10 = 100 N/mm²) 06=CuSn6Pb6Zn3 07=CuSn12 09=H68 10=CuZn25Al5Mn4Fe3 lubrication groove design, can be combined R=ring N=groove RN=ring and groove O=oval X=X groove OO=double oval
GxH-Bxx	bronze sliding bearing with filled lubricant holes, maintenance-free G1=low-temperature graphite G2=high-temperature graphite G4=water-resistant graphite G9=POM Bronze B1: made of CuZn25Al5 B2: made of CuSn6Zn6Pb3 B3: made of CuSn5Pb5Zn5 B4: made of CuAl10Ni5Fe5 B5: made of CuSn12
GH-B02S…-Gx	steel/bronze sliding bearing CuSn6Zn6Pb3 with filled lubricant holes (less expensive than GxH-B02) G1: low-temperature graphite G2: graphite for high temperatures G4: water-resistant graphite G9: POM;
GH-Sx…-G1	steel plain bearing HT250 (cast steel) with filled lubricant holes S1: made of HT250 (cast steel) S2: made of GCr15 (cast steel) lubricant G1: low-temperature graphite G2: graphite for high temperatures G4: water-resistant graphite G9: POM;
S-Sxx	steel plain bearing 42CrMo, embossed running area, requires maintenance S02: 42CrMo, embossed running area S03: 20Cr, with lubricant reservoirs
S04-yyy	steel plain bearings C45, 40Cr, requires maintenance lubrication groove yyy design, can be combined R=ring N=groove RN=ring and groove O=oval X=X groove OO=double oval
W-S05	spring bearing 65Mn, split, wave-shaped, requires maintenance
W-S05-…G	spring bearing 65Mn, split, wave-shaped, ground, requires maintenance
I-S05	spring bearing 65Mn, split, slot-shaped, requires maintenance according to DIN 1498