Drawn cup roller clutches (with and without bearing assembly)

Drawn cup roller clutches are similar to open-ended drawn cup needle roller bearings in design, but offer an enhanced function as a one-way clutch and transfer torques in one direction.

HF series drawn cup roller clutches only transfer torques.

Drawn cup roller clutches from the HFL series can also handle radial forces because of their integrated plain or roller bearings.

Product range

Series

Description

available in ABEG® performance classes

HF
HF-...-R
HF-...-KF
HF-...-KFR

Drawn cup roller clutch (without bearing assembly) and steel spring

R: with knurling for use in plastic housings
KF: with plastic spring
KFR: with plastic spring and knurling

HFL
HF-...-R
HF-...-KF
HF-...-KFR

Drawn cup roller clutch with bearing assembly and steel spring

R: with knurling for use in plastic housings
KF: with plastic spring
KFR: with plastic spring and knurling

IR-...-S

Accessories

Inner rings, raceways

Go to product

Seals for needle-roller bearings

Go to product

You might be interested in this too

08/20/2019

Identifying and repairing rolling bearing damage.

Rolling bearing damage can have a wide variety of causes and is not necessarily caused by a faulty original product. However, most companies are unable to carry out a detailed damage analysis – good thing Findling Wälzlager’s experts can provide further assistance here: Damage analysis is part of the service portfolio. Findling Wälzlager acts as an independent partner that looks into the causes of the ball bearing defects and helps solve problems.

06/02/2020

Tips for the right bearing clearance class

How do I know if I’ve chosen the right bearing clearance class – C0, CN, CM, C2, C3...? An article from our konstruktiv! series. Tips series.

04/01/2020

Load rating - higher, farther, faster

It is not the load rating but the right overall technical specifications that are decisive when it comes to the service life and performance of roller bearings.

03/30/2020

Combined radial/thrust bearing for high forces

Combined radial/thrust bearings hold a special position among rolling bearings: They are capable of simultaneously handling very large radial and axial forces and are characterized by their particularly compact design. Findling Wälzlager offers combined bearings in a wide variety of designs and rolling member pairings.

08/12/2013

Inner rings ground without twisting for optimum raceways

The use of inner rings ground without twisting, for example in conjunction with radial shaft seals, comes with a series of advantages: Among other things, this makes it possible to prevent lubricants from leaking and increases the service life of the sealing lips. Findling now also offers these components in two performance classes. A high degree of automation during production also allows large-scale production to benefit from attractive conditions and a maximum level of efficiency as well…

04/10/2013

Ready-to-mount cam followers

Findling Wälzlager GmbH now offers manufacturers of conveyor systems, guide units, and cam mechanisms hexagonal cam followers with integrated grease nipples. With dynamic loads of 410 N to just under 63 kN (static: 335 N to 144kN), they represent the peak of what is currently feasible.

01/31/2011

Specially coated track rollers

Track rollers and cam followers are often exposed to aggressive ambient media. That is why reliable rust protection is a decisive factor with respect to their service life.