Flange bearings
Flange bearings are made up of a bearing insert and a bearing housing made of gray cast iron or cast steel, thus forming easy-to-maintain and ready-to-mount units. The spherical design of the bearing insert allows them to adjust to any tilting of the shaft. Flange bearings are particularly well-suited for high radial loads and are very robust against external resistance thanks to their gray cast iron form. Flange bearings are available in a two-hole or four-hole design.
Standard housing product range
ABEG designation | Design | available in ABEG® performance classes | ||
---|---|---|---|---|
UCF-2... S-UCF-2... C-UCF-2...
| UCF-201 to UCF-218
cap housing bearings
| |||
UCF-3... | UCP-305 to UCP-328 (heavy-duty design) | |||
UCFS-3... | UCFS-305 to UCFS-328 (heavy-duty design) shaft diameter 25 mm to 140 mm | |||
UCFL-2... S-UCFL-2... C-UCFL-2... | UCFL-201 to UCFL-218
cap housing bearings
| |||
UCFL-3... | UCFL-305 to UCFL-328 (heavy-duty design) shaft diameter 25 mm to 140 mm | |||
UCFC-2... S-UCFC-2... C-UCFC-2... | UCFC-201 to UCC-218
cap housing bearings
| |||
UBFW-2... | UBFW-201 to UBFW-208
| |||
UCFA-2... | UCFA-201 to UCFA-212
|
Flange bearing made of other materials
In addition to housings made of gray cast iron, there are also other optimized materials for special applications
ABEG designation | Design | available in ABEG® performance classes | ||
---|---|---|---|---|
UCF-2...-SS | UCF-201 to UCF-212 made of stainless steel | |||
UCFW-2...-SS | UCFW-201 to UCFW-208 made of stainless steel | |||
UCF-2...-Y1 UCF-2...-Y2 UCF-2...-Y3 UCF-2...-Y7 | F and FL plummer block made of stainless steel bearing insert with ceramic balls like Y1, but bearing insert made of stainless steel like Y2, but cage made of solid lubricant bearing insert made of special stainless steel, cage made of fluorine resin | |||
UFL-0... | two-hole flange bearing with housing made of die-cast aluminum Clean Series from 8 mm shaft diameter | |||
UCVF-2...-SS | four-hole flange bearing made of engineering plastic UC bearing insert made of stainless steel | |||
UCVFL-2...-SS | two-hole flange bearing housing made of engineering plastic UC bearing insert made of stainless steel | |||
UBPFL-2... | two-hole flange bearing made of steel sheet UB (alt. EN, CS) bearing insert |
Product range of bearings inserts according to JIS 
ABEG designation | Design | available in ABEG® performance classes | ||
---|---|---|---|---|
EN | S-type bearing with eccentric, inner ring elongated on one side | ![]() | ![]() | ![]() |
EW | S-type bearing with eccentric, inner ring elongated on both sides | ![]() | ![]() | ![]() |
UB | Bearing insert with grub screw, elongated on one side | ![]() | ![]() | ![]() |
UC | Bearing insert with grub screw, inner ring elongated on both sides | ![]() | ![]() | ![]() |
UK | Bearing insert with conical inner ring (installation with adapter sleeve) | ![]() | ![]() | ![]() |
NC | Bearing insert with slotted inner ring and clamp ring with cylinder head bolt | ![]() | ||
ZK | Bearing insert Z-LOCK special lock, similar to UK with integrated adapter sleeve (patented) | ![]() | ||
CS-...-2RS | Bearing insert Installation on shaft tolerance | ![]() | ![]() | ![]() |
Find out more here: Bearing inserts for housing bearings, including conversion tables
Technical information
Housing bearings and their inserts are generally provided with initial lubrication ex works. We therefore do not recommend lubricating the bearings with a large quantity of grease again after installation and before putting them into operation.
Tip: After installation, it is possible to check whether the relubrication feature is working properly by carrying out a lubrication attempt. If the lubricant leaks between the housing and the bearing insert, please check to ensure that the bearing insert is positioned correctly in the housing.
Housings are made of gray cast iron according to EN-GIL-200/250 as standard. If higher strength properties are required, housings according to EN-GJS-400/450/500 are available.
Stainless steel housings are made of AISI304 or AISI316 and are therefore also highly resistant to salt water.
Plastic housing bearings are made of a technical polymer, which can also have anti-bacterial properties, depending on the requirements.
Housings made of steel sheet are supplied in a galvanized finish as standard. On request, we also offer them with a bright finish for customized coating/painting.
Please learn about the materials in the bearing inserts in the corresponding product group.
Additional information
Suffixes | Description |
---|---|
D1 | pre-greased with lithium soap grease, can be relubricated |
D2 | like D1, but with three lubrication holes in the outer ring of the bearing insert for compatibility with European designs |
M1 | like D1, but the bearing insert is treated with a black oxide coating for corrosion protection |
L3 | bearing insert with three-lip seal |
E | NEW: “semi-solid” base design for higher loads despite a decrease in weight |
K2 | high-temperature design, seal containing silicone |
K3 | non-contact seals for high speeds (fans) |
S3 | 100% noise-tested, for example for fans, with anti-twist protection |
S5 | combination of K3 + S3 + increased accuracy for bearing clearance, and tighter tolerances |
Y1 | standard roller bearing steal with ceramic balls |
Y2 | made of stainless steel with ceramic balls |
Y3 | made of stainless steel with ceramic balls and solid lubricant |
Y7 | bearing insert made of special stainless steel, cage made of fluorine resin |
Typical assembly and handling mistakes
- Lack of expertise
- Lack of qualified personnel
- Tightening torque of the fastening screws exceeded → cast housing may break out → proper assembly no longer possible

Additional information
Content | Page |
---|---|
Housing strength according to load direction | P. 48 |
Assembly and installation | P. 71 |
You can find more information in our FYH Housing Catalog