Split flange bearings
Split flange bearings have a housing with a removable cover so that they can be combined with the right roller bearing in accordance with the requirements. A classic combination consists of an F-500 (7225000) housing with a conical self-aligning ball bearing, an adapter sleeve, with or without locating rings, and a seal washer set. An end cap can also be used as an alternative to a seal.
The components each have to be purchased and assembled individually, meaning that these products result in high installation costs. For this reason, ready-to-mount SRU spherical roller bearing unitsare the “modern” version.
Standard housing product range
ABEG designation | Design | Available in ABEG® performance classes | ||
---|---|---|---|---|
F-500 | three-hole flange bearing | |||
I-120 | for self-aligning ball bearings with a wide inner ring Series 112 |
See the catalog for the extended range
Design | Product group | Series | Available in ABEG® performance classes | ||
---|---|---|---|---|---|
Self-aligning ball bearings | 12...-K+H-2... 112... | ||||
Spherical roller bearings | 222...-K+H-3... |
Technical information
The initial lubrication must take place with the installation of the roller bearings. The housings have a lubrication nipple (threaded or impact nipple), which can be used to relubricate them for maintenance purposes.
Tip: After installation, it is possible to check whether the relubrication feature is working properly by carrying out a lubrication test.