Deep-groove ball bearings
according to DIN EN ISO 625-1
Deep-groove ball bearings are versatile, self-retaining bearings with one-piece outer rings, inner rings and ball-cage assemblies. These simply designed products, which are durable and easy to maintain during operation, are available in single-row and double-row as well as open and sealed variants. Because of their very low frictional torque, deep-groove ball bearings are suitable for high and extremely high speeds.
Deep-groove ball bearings with a flange have a rib on the outer ring, which allows them to be secured axially against shifting.
Product range
| Series | Description | available in ABEG® performance classes | |||
|---|---|---|---|---|---|
| 6xx MR-xx | Miniature deep-groove ball bearings < 10mm shaft diameter |  |  |  |  |
| 60 - 62 - 63 - 64 | Standard bearing ≥ 10mm shaft diameter | | | | |
| 67 - 68 - 69 | Thin-section bearing for particularly compact installation situations | | | | |
| 160 | Dimension series 160 as an intermediate solution for thin-section bearings, also available in 2RS | | | | |
- Bearing clearance classes C2, CN, C3 and C4
- | Fa - axial load
- | Noise test by decibels
- | Noise test by vibration level for deep groove ball bearings
- | Noise test by vibration level for tapered roller bearings
- | P - dynamic equivalent load
- | PN/P0 tolerance class for radial bearings (without tapered roller bearings)
Technical information
The bearing clearance of a bearing is identified by means of its C mark (C0, C2, C3 ...).
C0/CN: standard bearing clearance class. This mark is usually omitted.
C2: decreases bearing clearance
C3: higher bearing clearance than C0/CN
C4: higher bearing clearance than C3
C5: higher bearing clearance than C4, used in particular in high-temperature bearings.
Special tolerances based on customer specifications: CX.Y (upper dimension X in µm, lower dimension Y in µm).
Abutment dimensions and radial runout accuracy have a decisive impact on the service life and function of rolling bearings. The selection of the shaft, housing and bearing tolerance should therefore always be checked in advance.
The following tolerance classes are available:
- Standard tolerances available ex stock: P0/PN
- Special tolerances: P6, P5
Cage types may vary depending on the size and application type. We carry various cage designs made of steel sheet and plastics.
| Cage designs | Mark | Comment |
| Sheet steel | J | Can be designed as a ribbon cage or riveted cage |
| Brass sheet | Y | |
| Glass fiber reinforced plastic | TV, TN, KU | Glass fiber content 25%, (standard), alternatively 30%, 40% |
A lubricant selection that is precisely tailored to the application conditions contributes disproportionately to the service life both in a positive and in a negative sense. For this reason, the technical and economical optimization of lubricant is an important contribution made by our application consulting.
An essential property of greases and oils is the reliable mechanical separation of the rolling element from the raceway. Depending on the application, you need special types of grease to achieve this function. The following properties in particular affect the function:
- the starting and operating temperature
- the speed of the bearing
- the external ambient conditions (moisture, contamination, vapors/gases...)
Our application engineers would be happy to analyze your application conditions and recommend suitable lubricants.
More information on special lubricants Contact for applications consulting
We use the following lubricant manufacturers as standard:
- Kyodo Yushi
- Klüber Lubrication
- Shell
- Lubcon
- Mobil
- Fuchs
We would be happy to make you a concrete offer for special processing, including the use of greases, oils or preserving agents specifically requested by you.
Rings
Outer and inner rings are manufactured from 100Cr6 (German standard), SUJ2 (Japanese standard) or GCr15 (Chinese standard) as standard.
Stainless steel products according to the AISI standard: AISI420, AISI440, AISI630 ...
Cage
Steel sheet cages are manufactured from DC01A/ST12 as standard.
Plastic cages (suffix TN, TV,TVP ...) may have different specifications but are usually made of polyamide. High-temperature designs made of PEEK.
Seals
Seals are manufactured from NBR (acrylonitrile butadiene rubber) as standard. This results in an operating temperature of -30 °C to +100 °C, even if the grease permits a higher temperature. The low chemical resistance makes other sealing materials necessary, which we would be happy to select for you as part of the application consulting:
- HNBR
- ACM
- FKM/FPM (also known under the brand name Viton).
©Viton is a protected trade name of DuPont Dow Elastomers L.L.C.
Findling Wälzlager has already realized more than 1,500 drawing parts for its customers. We will find you an economically and technically optimal solution for your application from the combination of ABEG® performance class and designs. You can trust 100 years of experience in rolling bearing technology.
